Menu Search
Ground Investigations: Selecting the Right Tool for the Job

Ground Investigations: Selecting the Right Tool for the Job

  • Posted on 1st February 2019
  • Category:

Ground investigation is a vital aspect of any development project. Careful planning is needed to give the correct ground characterisation data and inform the development process.
For all construction projects, it is a necessity to gather an accurate understanding of ground conditions, to either address geotechnical considerations, such as foundation design, or contamination concerns.

We have over 50 years’ experience in the design of ground investigations on a site-specific basis. Below are some of the ground investigation techniques that we use;

Window Sampling

Window Sampling is a form of lightweight tracked drilling rig, which provides a rapid and economical method of obtaining soil samples from the top 5m to 10m below surface. Most sites are easily accessible and, if there is 3m of head clearance, equipment can be used inside buildings.

This form of investigation is ideal where rapid, minimal disruption investigation is required. It can, however, be constrained due to the small size of the equipment, which limits the depth of penetration in hard ground conditions.

Cable Percussive Drilling

Cable Percussive techniques use a road towable tripod configuration, which drops cutting tools into the ground by cable and winch to progress a borehole through soils and soft rocks such as London Clay.

Percussive drilling can be noisy, causing disruption on site, with a working area of at least 5m by 5m required for each borehole position. The equipment can be heavy and manoeuvring over soft or boggy ground conditions can be problematic.

Trial Pits

Typically formed using a mechanical excavator, Trial Pits are a means of investigating shallow ground conditions quickly and efficiently. Typically, the investigation is limited to around 3.5m depth, or less where shallow groundwater is present.

A disadvantage of using Trial Pits is the disruption they cause when breaking out large areas of hardstanding, which is a time-consuming process.

Rotary Coring

Rotary coring is used to form a deep observation borehole or to obtain representative samples of rock not recovered using traditional percussion or window sampling. The drilling method involves a powered rotary cutting head on the end of a shaft, which is driven into the ground as it rotates.

Rotary drilling is most frequently used where there are risks of coal mining voids, or where we are investigating groundwater conditions in deep rock aquifers.

Geophysics

Geophysics is an often-overlooked method of ground investigation and involves remotely sensing ground conditions using non-intrusive methods.

We use many forms of geophysics on our projects, including magnetometry, microgravity and ground penetrating radar. Geophysics is usually used alongside, or prior to, physical borehole and Trial Pit investigations. By allowing a more targeted approach, these techniques can often reduce the cost of physical investigations.

“When we are asked to consider a scope of works for a ground investigation, we will always consider all the options and come up with the best techniques. Our objective is to give maximum value for money, whilst achieving the best characterisation of the ground conditions.

In our opinion, underspending on ground investigation can be a false economy. As the saying goes – “you pay

for a ground investigation whether you have one or not”.

If you wish to discover more about the topics within this article, please contact Neil Morris at neil.morris@patrickparsons.co.uk.